Connected Distribution

×
 x 

Cart empty
Cart empty
 
 
 T: + 44 (0) 1242 511133

Xantech - XT-4K-VIP-TX

Xantech - XT-4K-VIP-TX. 4K Video Over IP Transmitter with Audio Breakout and Independent Signal Routing over 1Gb Network
Array
Description

The Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch.

The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture.

The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE.With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.

Key Features and Benefits
  • Wizard-based installation for easy set-up and installation – basic product installation/configuration takes just seconds without needing a computer or configuration software
  • No need for knowledge of networks or creating VLAN’s
  • Product supports full 4K UHD input, including HDR (@24fps) up to lengths of 100m
  • Exceptional image quality, virtually latency free (1 frame)
  • Receiver’s built-in video scaler allows each display to use its optimal resolution
  • Scales to incorporate virtually any number of transmitters and receivers
  • Easy integration with all 3rd party control systems including ELAN, Control 4, Savant, Crestron, RTI, URC
  • Loop-out network port enables daisy chaining receivers to extend distances
  • IR control and IR pass-through control enabled
  • PoE from a compatible PoE network switch can power all components within the system
  • Designed to be configured with virtually any Layer 3 Gigabit network switch

Any Size

 

Take a closer look?

Video over IP | Xantech

Xantech XT-4K-VIP-TX - Features:
  • Advanced UHD video over 1Gb Network
  • Virtually unlimited system size
  • Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
  • Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)*
  • Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
  • Video up-scaling and down-scaling
  • Features 4 operational modes:
    - Matrix distribution (Requires 1Gb network switch)
    - Video wall (Requires 1Gb network switch)
    - One-to-one HDMI extender (No network switch required)
    - One-to-many HDMI splitter (No network switch required)
  • HDCP 2.2 Compliant
  • Advanced EDID management
  • Analogue L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter
  • Analogue L/R audio breakout on XT-4K-VIP-RX Receiver
  • Bi-directional RS-232 and IR pass through
  • USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
  • PoE (Power over Ethernet) to power Xantech products from PoE switch
  • Local 24V 1A power input should network switch not support PoE, sold separately
  • Simple configuration via web-GUI through the XT-4K-VIP-ACM
  • HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analogue audio output supports up to 96Khz only
  • RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM

* NOTE: HDR support is dependant on video signal bandwidth. Please see table in product manual for reference.

Xantech XT-4K-VIP-TX - Specifications:
  • Video input 1 x HDMI Type A, female
  • Audio input 1 x 3.5mm L/R analogue audio
  • Audio output 2 x RCA L/R analogue audio
  • Video output/Ethernet port 1 x LAN RJ45 connector (PoE 9W)
  • USB / KVM 1 x USB, Type B
  • RS-232 serial port 1 x 3-pin Phoenix connector
  • IR input 1 x 3.5mm stereo jack
  • IR flasher 1 x 3.5mm mono jack
  • Firmware update 1 x USB Micro B
  • Accessories Mounting kit included
  • Dimensions (W x D x H ): 190mm x 114mm x 25mm
  • Shipping weight (Kit): 0.8kg
  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Storage temperature: -4°F to 140°F (-20°C to 60°C)
Xantech XT-4K-VIP-TX - Downloads: