Connected Distribution

×
 x 

Cart empty
Cart empty
 
 
 T: + 44 (0) 1242 511133
a2100_front_rear-rsw
a2100_front-rsw
a2100_rear-rsw

Russound A2100 - Two-Channel 100 WPC Digital Power Amplifier

Half-Rack Width Digital Two Channel 100w Power Amplifier
Description

The Russound A2100 uses high quality digital amplification. With Russound  utilising the latest Class D digital amplification technology, the A2100 offers an impressive 100 watts per channel at 8 ohms with less than 0.1% Total Harmonic Distortion (THD+N).

Don’t let the small size fool you. Designed to handle an impedance as low as 4 ohms allows a total of four 8-ohm speakers to be used with the A2100 amplifier. If 100 watts isn’t enough for you, the A2100 includes a bridge option that allows you to bridge both channels into a single incredibly powerful 225-watt output. Combine two A2100 units together in the same system and you can have a stereo output at 225-watts per channel at 8 ohms, all in a 1U design.

The additional benefit this modern digital amplification is that the A2100 takes up a half-rack space and is only 1U high. Each A2100 includes a complete rack-mounting kit in the box to mount either a single A2100 or to link two Russound half-rack components together into a single 1U rack space.

The A2100 includes a stereo buffered line output that can be used for daisy-chaining additional amplifiers to your system. By using the integrated line outputs, you can add multiple amplifiers and create an expansive audio zone for very large rooms or outdoor zones that require additional power or more speakers.

The A2100 has all of the features needed to integrate fully with any other audio components. It has three modes of operation:

1) Always On – Ready whenever you need it in your system
2) Auto On (Signal Sensing) – Detects the presence of an audio signal and turns on when needed
3) Trigger – Detects the presence of a 12vDC signal and turns on the amplifier when the signal is present and turns it off when the signal goes away.

The rear panel of the A2100 also includes a removable cord lock that can be used to secure the power cord to prevent accidental disconnects when servicing the system, moving wires, or pivoting a rack full of gear. No more frustrating service calls for a simple unplugged unit. Ease of custom. The A2100 also includes the option of using the rack ears to mount it to a wall or other flat surface like the interior of a cabinet. The elegant design also permits its use in a table-top application for use on a shelf or cabinet.

Installer-friendly connectors are used for all speaker connections, allowing audio professionals to lock in all connections for a long-lasting, trouble-free installation that is still easy to service and adjust throughout the life of the system. All connectors accept up to 12ga wire.

Russound A2100 Digital Two Channel Power Amplifier - Features & Benefits:

Space-saving 1/2-rack design combines easily with other Russound 1/2-rack products
Class D amplifier
Powerful 100 watts per channel at 8 ohms
Bridgeable to 225 watts at 8 ohms
12v trigger input and output for automated turn-on
Buffered line output for easy expansion to additional amplifiers as needed
Easy-to-Use cable lock included to prevent unwanted disconnects when servicing an installation
Removable screw-down speaker connectors for easy, reliable connections
Rack mount ears for both 1/2-rack and full-rack width mounting are included in the box

Russound A2100 Digital Two Channel Power Amplifier - Specifications:

Continuous Output Power:
 100W @ 8 Ohms < 0.1% THD+N
 125W @ 4 Ohms < 0.5% THD +N
 225W Bridged @ 8 Ohms < 0.2% THD+N
Minimum Impedance: Stereo mode - 4 ohms bridged mode - 8 ohms
Power Requirements (Autoswitching Power Supply):
240VAC 50/60Hz 2.5A IEC 320 type connector with 3 terminal detachable power cord
Standby Power: Rack Ears: Included
Parts and Labour Warranty: 2 years
Product Dimensions: 21.59 x 26.67 x 4.45 cm
Product Weight: 1.9 kg

Russound A2100 Digital Two Channel Power Amplifier - Resources & Downloads:

Russound A2100 Digital Two Channel Power Amplifier Product Brief

Russound A2100 Digital Two Channel Power Amplifier Manual