Connected Distribution

×
 x 

Cart empty
Cart empty
 
 
 T: + 44 (0) 1242 511133

Russound SDB-4.1 - Dual Source Four Pair Impedance Matching Speaker Selector with Volume Control

Dual Source Four Pair Impedance Matching Speaker Selector with Volume Control
Description

The most important and most forgotten about subject in getting reliable and high quality distributed audio is arguably impedance matching...Forget these fundamentals and you will open up a host of issues!

The SDB-4.1 is a highly efficient dual-source speaker selector that controls four pairs of speakers. The front panel provides a separate volume control for each speaker pair, allowing you to adjust the volume in each room from one convenient location.

With two amplifier inputs, the SDB-4.1 allows you to choose a separate program in each room. Each zone also has an on/off switch, which allows you to keep the volume control at a set level while turning the speakers on or off.

The SDB-4.1 uses high-quality impedance-matching autoformers to maintain a safe operating load at the amplifier while distributing maximum power throughout your system. Designed for use with either 4- or 8-ohm speakers, the SDB-4.1 is equipped with internal jumpers to select the degree of impedance matching based on the impedance of your speakers and your amplifier's impedance requirements.

Russound SDB-4.1 - Dual Source Four Pair Impedance Matching Speaker Selector Features & Benefits:

Lets you select music and control volume in two rooms from a central location
Dual amplifier inputs allow a choice of program/amplified source in each room
Printed room labels included
Detachable snap connectors are color coded for easy wire termination
Selectable impedance matching accommodates 4- or 8-ohm speakers
High-quality autoformers provide trouble-free performance for years
Power : 200 watts per channel RMS continuous
Power : 400 watts per channel average
Power : 600 watts per channel peak
Volume Control: 42 dB attenuation, 12 positions
Impedance Matching: Russound Ultra-Match™ Autoformers
Wire Size: up to 12 gauge wire

Russound SDB-4.1 - Dual Source Four Pair Impedance Matching Speaker Selector Specifications:

Power Handling :
  200 W per channel RMS continuous
  400 W per channel average
  600 W per channel peak
Volume Control: 42 dB attenuation, 12 positions
Impedance Matching: Russound Ultra-Match™ Autoformers
Wire Size: up to 12 gauge wire
Dimensions: 17.0” W x 3.0” H x 6.25” D (43.2 x 7.6 x 15.9 cm)
Weight: 9 lb (4.05 kg)

Russound SDB-4.1 - Dual Source Four Pair Impedance Matching Speaker Selector Resources & Downloads:

Russound SDB-4.1 - Dual Source Four Pair Impedance Matching Speaker Selector Operation Manual

Russound Amplifier Clipping Technical Tip Guideline