Connected Distribution

×
 x 

Cart empty
Cart empty

  

 

T: + 44 (0) 1242 511133

Yamaha AVENTAGE MX-A5200 11 Channel Power Amplifier

AVENTAGE 11-Channel High Performance Power Amplifier
Description

Yamaha's MX-A5200 is their flagship AVENTAGE power amplifier that is designed to fit with the CX-A5200 11.2-channel Network AV Pre-Amplifier.

AVENTAGE Separate Components represent the pinnacle in exhilarating home entertainment. In pursuit of the ultimate in home cinema, Yamaha establishes a new benchmark in performance and innovation.

The MX-A5200 offers 11 x discrete channels of amplification with flexible configuration options - delivering an impressive combination of power and quality. Enjoy the flexibility of a multi-zone system or immerse yourself in exhilarating surround sound using any combination of 11-channels.

Precisely planned, circuit-routed and designed with a symmetrical power amplifier layout, the MX-A5200 achieves ideal channel separation with left and right sides being both physically and electrically isolated. The design also greatly improves signal-to-noise ratio and achieves an expansive sound stage. The MX-A5200 utilises a high-output, large toroidal transformer combined with 2 specially developed high-capacity block capacitors to deliver massive power with generous headroom. Also, energy loss is minimised and ensures effortless reproduction of sound sources.

To further enhance power capacity, the MX-A5200 supports Bridge Tied Load (BTL) configuration for the front 2 channels. This allows for a major improvement to the front speaker performance. As part of its uncompromising design, the MX-A5200 boasts a specially designed chassis to maximise rigidity and eliminate the effects of vibration. The MX-A5200 employs a double bottom construction consisting of vibration control plates made of 1.6 mm steel - echoing that of the legendary Z11 AV receiver. In order to support the heavy heat sinks and other components, a left-right independent construction strengthened by a rigid-frame structure is utilised. The bottom frame reduces the transmission of vibration produced by the large power supply transformer and heat sinks.The MX-A5200 also incorporates a heavy insulator that blocks external vibration.

When connecting AV components, electrical noise can be introduced - a result of the connections between them and also from other sources of external noise. To combat this inherent issue, the MX-A5200 utilizes balanced connections for all 11-channels - the same type found in professional audio applications. Additionally, the alternative RCA unbalanced connection uses a ground sensing transmission method that achieves simple balanced transmission.

The rear of the MX-A52000 features high-quality, gold-plated terminals that are compatible with Y plugs (spade connectors) for optimal connections with speakers. Stabilising the chassis is the key to enhanced performance and deep, sinking sound. The MX-A5200 achieves this by employing a thick bottom plate which acts to steady the entire structure and achieve optimal sound.

When coupled with the CX-A5200 it sets a benchmark for best hopme cinema integration and performance - making it a must for the most discerning customers and custom installation professionals alike.

Yamaha MX-A5200 11 Channel Power Amplifier Features, Benefits & Specifications:

Amplifier Section:
  Channels: 11
  Rated Output Power (1kHz, 1ch driven): 290 W (4 ohm, 0.9% THD), 230 W (6 ohm, 0.9% THD), 190 W (8 ohm, 0.9% THD)
  Rated Output Power (1kHz, 2ch driven): 170 W (8 ohm, 0.9% THD)
  Rated Output Power (1kHz, 2ch driven, bridged connection): 240 W (8 ohm, 0.9% THD)
  Rated Output Power (20Hz-20kHz, 2ch driven): 170 W (6 ohm, 0.06% THD), 150 W (8 ohm, 0.06% THD)
  Rated Output Power (20Hz-20kHz, 2ch driven, bridged connection): 200 W (8 ohm, 0.06% THD)
  Maximum Effective Output Power (1kHz, 1ch driven) (JEITA): 280 W (6 ohm, 10% THD), 230 W (8 ohm, 10% THD)
  Dynamic Power per Channel (8/6/4/2 ohms): 190 / 250 / 350 / 500 W
Audio Features:
  A.R.T. Wedge: Yes
  BTL connection: Yes
  Bi-amp capability: Yes
  Digital ToP-ART / High Current Amplification: Three-stage Darlington Power Stage
  Current Feedback Amplifier Circuit: Yes
Connectivity:
  Analogue Audio Input/Output: XLR Balance: 11 / 0, RCA Unbalance: 11 / 0
Zone Control:
  +12V Trigger Output: Out:1, Trigger in / Through: 1 / 1
General:
  Standby Power Consumption (IR only): 0.1 W (typical)
  Auto Power Standby: Yes (ON / OFF switch)
 Dimensions (W x H x D): 435 x 211 x 464 mm
 Weight: 26.4 kg;
 Power Consumption: 650W
 Finishes: Black & Titanium

Yamaha MX-A5200 11 Channel Power Amplifier - Resources & Downloads:

Yamaha MX-A5200 Operation Manual